Assessment Methodology · Building Condition & Capital Planning
The Enablement Chain: From Evidence to Action
Reliable decisions need reliable building information. Our assessment follows defined steps with documented outputs and review points, so recommendations trace back to field evidence. Technical terminology is explained as context; methodology does not replace professional qualifications or statutory requirements.
01
Scope
Agree sites, systems, and access, then review drawings, inventories, and maintenance records. Output: signed-off scope.
02
Capture
Engineers survey each site, recording equipment, nameplate data, deficiencies, and geotagged photos. Output: located field record.
03
Validation
Licensed engineers peer-review every condition, criticality, and risk rating against field evidence. Output: validated asset data.
04
Analysis
Remaining useful life, renewal timing, backlog, and planning-level costs rolled up to metrics such as FCI. Output: lifecycle cost model.
05
Reporting
Prioritized, scoped projects in a multi-year capital plan, plus CMMS, EAM, or GIS exports. Output: decision-ready project list.
DATA CAPTURE PROTOCOLS
Field data captured to populate an engineering-validated model
The assessment creates and populates a spatially organized model of an owner's physical infrastructure. Capture methods are selected to serve that model—based on asset type, assessment objectives, access conditions, and agreed scope. Not every method or sensor is used on every engagement. Each observation is recorded with its location, capture method, and field conditions so it can be traced and reviewed.
01 / VISUAL RECORD
Video, Photographs & Data Plates
Systematic video walkthroughs and photographs document observed conditions in context. Data-plate capture records identifying information—manufacturer, model, serial, and ratings—where legible and accessible. AI-assisted image analysis may help organize captured imagery, with all results subject to engineering review.
Limitation: Coverage depends on access, visibility, and the condition of plates and labels. Review point: AI-organized imagery is checked by an engineer.
02 / SPATIAL
Location, Spatial & 3D Capture
Spatial methods tie each asset and observation to its building, floor, room, or system—so the model is organized spatially rather than as a flat list. LiDAR or other 3D capture may be used where appropriate to the asset and objectives.
Limitation: Spatial outputs support organization and context; they are not survey-grade measurement. Traceability: Each record is linked to its location.
03 / CONDITION TESTING
Thermal, Vibration & Moisture
Where conditions and scope warrant, thermal imaging, vibration readings, or moisture detection can supplement visual observation. Methods are applied selectively based on asset type, physical conditions, and the question being investigated.
Field conditions: Readings reflect conditions at time of capture. Review point: Results are reviewed in engineering context, not treated as standalone conclusions.
04 / SYSTEM MEASUREMENT
Electrical, Pressure/Flow & NDT
Electrical measurements, pressure and flow readings, material thickness, ultrasonic testing, or other non-destructive measurements may be included where appropriate to the asset, objectives, physical conditions, and agreed scope.
Limitation: Method selection is set per engagement; no accuracy or compliance is claimed beyond what each method and its field conditions support.
ENGINEERING REVIEW
Condition scoring, risk weighting, and remaining-life analysis validated by engineers.
FIELD DATA
Asset inventory · tags
Install year · age
Observed deficiencies
Photos · field notes
Sensor readings
Location · spatial data
Maintenance history
DECISION-READY
Condition Ratings
FCI
Multi-year Plan
MODELING LOGIC
Engineering-Validated Outputs
Captured field data is translated into condition ratings, ranked risk priorities, and lifecycle implications for every system. The result is a clear, management-ready view of what needs attention, when, and at what cost.